Running Freesco from a HDD without MSDOS

If you need some help, this should be the first place to look.

Postby Kevin Linx » Fri Feb 08, 2002 5:43 pm

<font color='#000000'>Running Freesco from a HDD without MSDOS - a HOWTO by Serge
--------------------------------------------------------------------------------
Code: Select all
 - HOWTO -
Running Freesco 0.2.7 from a HDD without MSDOS.


1. Make sure your hdd partition is FAT-12 or FAT-16.
NOTE: FAT-32 is not supported.

2. Download syslinux.gz from http://www.freesco.org/dload/uncls/
and save it on freesco floppy in a:\ router\ directory.
(if you have tuned freesco on a floppy which can connect to internet you can skip this step).

3. Insert Freesco floppy and boot from it.

4. Connect to intenet and download syslinux.gz:
export `grep PROXY /etc/system.cfg`
snarf http://www.freesco.org/dload/uncls/syslinux.gz
/tmp/syslinux.gz
or if you downloaded file in step 2 just copy it:
cp /mnt/router/syslinux.gz /tmp/syslinux.gz

5. Unpack it and make it executable:
zcat </tmp/syslinux.gz >/tmp/syslinux
chmod a+x /tmp/syslinux

6. Move your router to hdd:
move2hdd

7. Mount your hdd partition:
mount -t umsdos /dev/hda1 /hd

8. Copy ramdisk and kernel:
cp /hd/router/ramdisk /hd
cp /hd/router/kernel /hd

9. Create new syslinux config file:
cat /mnt/syslinux.cfg | sed s/fd0/hda1/g > /hd/syslinux.cfg

10. Unmount hard disk partition:
umount /hd

11. Install syslinux:
syslinux /dev/hda1

12. Halt your router.
halt

13. Remove floppy and press Reset button.

14. Enjoy.
by: Serge 10/22/00

================================================================
*Please Do NOT REPLY to the POST of this FAQ. If you wish to dicuss it, Use the Proper Forum Section*</font>
Kevin Linx
 

Return to FAQ - Frequently Asked Questions

Who is online

Users browsing this forum: No registered users and 2 guests

cron